Signature carnauba shine, heavy-duty protection and ultimate durability

• Collinite’s longest-lasting automotive formulation
• Award-winner in independent tests for endurance
• Produces lustrous finish while shielding against outdoor elements

Directions:

Surface should be dry, pre-cleaned (contaminant-free) and feel lukewarm to the touch. Apply wax in THIN, even coat to a CLEAN section no larger than 2x2 ft at a time with applicator pad. As soon as wax dries/hazes, polish off with dry microfiber towel (turned over frequently).     

Applications:

• Car, truck, bike, RV, boat, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
• Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints 
• CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
• NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.

 

 

Signature carnauba shine, heavy-duty protection and ultimate durability

• Collinite’s longest-lasting automotive formulation
• Award-winner in independent tests for endurance
• Produces lustrous finish while shielding against outdoor elements

A Mr. Collins original, this classic carnauba/polymer blend is also Collinite’s most durable. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial. Handcrafted and handpoured in the USA.

Directions:

Surface should be dry, pre-cleaned (contaminant-free) and feel lukewarm to the touch. Apply wax in THIN, even coat to a CLEAN section no larger than 2x2 ft at a time with applicator pad. As soon as wax dries/hazes, polish off with dry microfiber towel (turned over frequently).     

Applications:

• Car, truck, bike, RV, boat, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
• Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints 
• CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
• NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.

 

 

Easy to use polish restores, shines and protects in one single operation.

• Removes mild rust, salt deposits and heavy film
• Leaves behind radiant, durable wax coasting
• Protects against future corrosion and pitting
• Available in 16 fl oz.

Brings your faded, rusted, and tarnished metal accessories and fittings back to life. This rejuvenating polish saves both time and money by combining restorative and protective properties in one step. Safely removes stubborn discoloration, oxidation, and blemishes. Wipes off to reveal high luster shine and coating that guards against future rust, stains, and weathering. For a variety of marine metal finishes; non-coated and non-painted metals. Handcrafted and poured in the USA. 

Directions:

Place finger over cap and shake well before using. Apply a drop of No.850 to microfiber applicator pad and spread evenly across a1x1 ft section. Rub well to loosen all tarnish, rust etc. As product begins to dry, polish off with dry microfiber towel. Reapply as necessary for stubborn contamination. To obtain added protective durability on clean surface, follow up with one of Collinite’s last step waxes (No. 845, 476, 925 or 885). 

Applications:

• Exterior marine and aeronautical metal finishes
• Tarnished or weathered non-anodized, non-painted, non-coated metals 
• Stanchion rails, rub rails, fittings, accessories, t-tops and more
• NOT recommended for painted metals, anodized aluminum

 

All in one cleaner-polish-protectant renews neglected paint and provides high gloss shine while protecting against future weathering. 

• Cleans, polishes and protects in one step
• Clear coat safe
• Gently removes mild contaminants and minor swirls
• Provides high level of gloss and durable water beading

All in one cleaner-polish-protectant renews neglected paint and provides high gloss shine while protecting against future weathering. Micro abrasives gently restore clarity by removing brake dust, light water spots, minor swirls & other mild contaminants that washing will not eliminate from finish, while carnauba-polymer wax blend enhances gloss and brightens dulling surfaces-leaving behind a level of durable paint protection not commonly found in single step products. For clear coat & single stage exterior automotive paint. Not for use on non-painted plastic trim, vinyl, rubber or glass. Handcrafted and hand-poured in the USA.

Directions:

Place finger over cap and shake well before using. Surface should be pre-cleaned, dry and feel lukewarm to the touch. Apply small amount of No.325 to microfiber applicator pad and spread evenly across 2x2 ft section at a time. Rub as necessary to loosen surface contaminants/light oxidation. As product begins to dry, polish off with dry microfiber towel. Reapply as necessary for stubborn contamination. To obtain added protective durability on clean surface, follow up with one of Collinite’s last step waxes (No. 845, 476 or 915). 

Applications:

For clear coat & single stage exterior automotive paint

Not for use on non-painted plastic trim, vinyl, rubber or glass

 

With our deepest carnauba shine, this top-shelf blend is the product to have for darker, pristinely-kept finishes.

• Collinite’s highest concentration of rare carnauba wax
• Seals in prep work; enhancing showroom look while protecting finish
• Surpasses other high-end waxes in both durability and value

We devote ridiculous amounts of #1 grade carnauba to all our pure wax formulations, but the No. 915 takes the gold cigar. With over 15% more than our No. 476s, the Marque D' Elegance boasts Collinite’s highest amount of rare carnauba; yielding our highest gloss and warmest shine to darker, meticulously maintained finishes. Look for exceptional durability and a price that’s hundreds less than other boutique brands. Handcrafted and hand poured in limited quantities in the USA.

Directions:

Surface should be dry, pre-cleaned (contaminant-free) and feel lukewarm to the touch. Apply wax in THIN, even coat to a CLEAN section no larger than 2x2 ft at a time with applicator pad. As soon as wax dries/hazes, polish off with dry microfiber towel (turned over frequently).

Applications:

• Exterior automotive surfaces
• Clear-coat, single stage and lacquer paints
• NOT recommended for rubber, black trim, vinyl, glass or non-painted plastic.

Combines high gloss shine, ease-of-use and long-lasting weather protection

• Collinite's #1 selling, "most talked about" product
• Easy on, easy off application
• Unique durability and water beading 

A user-friendlier version of the No. 476s paste, No. 845 stands as Collinite’s most legendary product to date. Famous for its versatility, durability and DIY ease of use, “IW” is ideal for both small and large surface area jobs where lasting protection and timely job completion are desired, but hard buffing and frequent reapplication are not practical. Leaves behind carnauba shine and durable coating that preserves finish and shields against the elements; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more. Handcrafted and poured in the USA.

Directions: 

Place finger over cap and shake well before using. Product’s viscosity may vary. Surface should be dry, pre-cleaned (contaminant-free) and feel lukewarm to the touch. BY HAND: Apply a small drop/dab of No. 845 to microfiber applicator pad and spread THIN and evenly across a 2x2 ft section at a time. As soon as wax dries/hazes, polish off with dry microfiber towel (turned over frequently). BY MACHINE: Prime finishing pad with 4 pea-sized drops of product. Work in overlapping passes-2x2 ft section at a time-speading wax evenly. As soon as wax dries/hazes, polish off with dry microfiber towel (turned over frequently). For remaining 2x2 ft sections, apply 2 pea sized drops to pad.

Applications:

• Car, truck, boat, bike, RV, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
• Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints
• NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.