
Vendor: WD-40
Type: FLUID
Price:
1599.00
WD-40 SPECIALIST® ELECTRICAL CONTACT CLEANER SPRAY, featuring patented Smart Straw® technology, blasts away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. It dries quickly, leaves no residue and removes more soil than leading competitors, making it the best at cleaning electrical contacts. Safe to use and 50-state VOC compliant, it’s ideal for use on printed circuit boards, controls, switches, precision instruments and electric panels.

Vendor: TOTACHI
Type: Catalytic Cleaner
Price:
2799.00
TOTACHI® Foam Catalytic Converter Cleaner is a highly effective foam cleaner for catalytic converters. It dissolves, unclogs and removes the carbon build-up, sulfur and phosphorus in the catalytic converters.
Description:
TOTACHI® Foam Catalytic Converter Cleaner is a highly effective foam cleaner for catalytic converters. It dissolves, unclogs and removes the carbon build-up, sulfur and phosphorus in the catalytic converters. Restores the efficiency of the catalytic converter to reduce the vehicle’s exhaust emissions and reduce harmful gas emissions. It eliminates power loss for an optimum driving performance. Improves fuel economy, horsepower, acceleration and reduces harmful emissions. Regular use of the product prevents complete failure of the converter and prevents costly maintenance.
TOTACHI® Foam Catalytic Converter Cleaner restores the functionality of the converter ensuring compliance to the regulatory requirements and emission inspections. It provides noticeable improvements in vehicle performance, restores the responsiveness of vehicle’s throttle and improves the overall drivability. High efficiency, low product consumption, thanks to economical spray dispensers, will allow you to save on service station costs.
Application:
Recommended for use in automotive repair shops. It can be used as a DIY catalytic converter cleaner. It is a professional product that works with turbo, direct injection, and hybrid engine vehicles. Developed with strict adherence to the highest standards of quality and safety.
Shake the can before use. Dismantle the oxygen sensor. Check the catalytic converter using a scope camera to see if there are cracks. If there are no cracks, proceed with the cleaning process.
Insert the probe through the opening. Spray the cleaner with the probe inserted into the hole in 5-second intervals until the unit is filled with foam. Assemble back the O2 sensor. Close the opening after application. Start the engine.

Vendor: TOTACHI
Type: Brake & Parts Cleaner
Price:
1399.00
CUSTOMER BENEFITS:
• Clean engine Removes traces of waste oil deposits.
• Improved engine performance Improves starting and restores engine power characteristics.
• Environmentally friendly Reduces exhaust toxicity.
• Optimized fuel consumption Normalizes fuel consumption.
• Economical Low product consumption thanks to economical spray dispensers will allow you to save on service station costs.
PRODUCT DESCRIPTION:
TOTACHI Air Intake & Carb Cleaner is a professional and highly efficient cleaner that quickly and effectively cleans carburetor channels and chambers, jets, throttle valves, and crankcase ventilation valve. Dissolves and removes all types of contaminants such as resin, carbon deposits and other deposits of waste substances formed during operation. Restores engine power, improves engine starting, normalizes fuel consumption and reduces exhaust toxicity. As a preventive measure, it can be used 2-3 times a year. TOTACHI Air Intake & Carb Cleaner is a specially developed formula for professional use that allows you to quickly achieve results. High efficiency, low product consumption, thanks to economical spray dispensers, will allow you to save on service station costs.
APPLICATION:
Recommended for use in automotive repair shops. It is a professional product for cleaning the carburetor and intake system. Developed with strict adherence to the highest standards of quality and safety. Shake the can before use. Start and warm up the engine, remove the air filter with its housing. With the engine running, spray the product in small portions into the carburetor cavity, on throttle valves and systems that require cleaning. At the same time, slightly open the throttle valve and increase the speed. Prevent the engine from stalling. After cleaning, adjust to idle speed, if it is required by the cleaning regulations. For ease of use, use the supplied extension tube.

Vendor: TOTACHI
Type: Brake & Parts Cleaner
Price:
1399.00
TOTACHI® Brake & Clutch Cleaner is a professional and highly effective degreaser for cleaning of brake pads, drums, discs, cylinders, ABS components and other parts of brake systems, as well as clutch parts. The improved formula accelerates the maintenance process without the need to dismantle and disassemble the brake & clutch systems. Eliminates creaking and increases the braking efficiency by deeply cleaning the micro particles caused by friction.
TOTACHI® Brake & Clutch Cleaner is used as a universal degreaser for vehicle maintenance. Removes any used oil and grease contaminates. The nozzle tube from the spray valve allows accurate dose of the active components and deeply cleans the targeted areas.
APPLICATION:Recommended for use in automotive repair and maintenance shops. It is a professional product meticulously formulated for cleaning of automotive brake and clutch components. Developed with strict adherence to the highest standards of quality and safety. Endorsed for application in automotive repair facilities, this product serves as a versatile degreaser during routine vehicle maintenance. While primarily intended for professional use, with appropriate precautions, it is also suitable in household use for removal of grease stains.
Shake the can before use. Spray the product on the areas that need cleaning. Repeat the process if necessary.
Do not use on plastic, painting, and varnish surfaces.
Vendor: WD-40
Type: FLUID
Price:
1499.00
WD-40® SPECIALIST® WATER RESISTANT SILICONE LUBRICANT safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn’t stick or make a mess, so it won’t attract dirt. Effective in a temperature range from -100°F to 500°F, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant.

Vendor: NASA
Type: Carb Cleaner
Price:
699.00
Rusto Nil spray is a multipurpose special spray for homes, automotive, marine, arms and ammunition, as well as for industrial use. It displaces water, protects against rust and corrosion, and loosens rusted parts. It corrects engine starting problems due to moisture or water, especially in the rainy season, as it removes water and moisture from spark plugs and other electric and electronic parts. It frees sticky and jammed mechanisms of doors, locks, machines, computers, sanitary fittings, and etc.
Directions:
Shake well before use.
Disconnect electrical connections.
Spray on desired parts and allow to soak.
For better results, do not wipe off.
Precautions:
The contents are highly flammable and under pressure.
Keep away from heat and flame.
Do not puncture or incinerate the can.
Keep away from children.
Pack Size:
450 ML

Vendor: NASA
Type: Carb Cleaner
Price:
499.00
Rusto Nil spray is a multipurpose special spray for homes, automotive, marine, arms and ammunition, as well as for industrial use. It displaces water, protects against rust and corrosion, and loosens rusted parts. It corrects engine starting problems due to moisture or water, especially in the rainy season, as it removes water and moisture from spark plugs and other electric and electronic parts. It frees sticky and jammed mechanisms of doors, locks, machines, computers, sanitary fittings, and etc.
Directions:
Shake well before use.
Disconnect electrical connections.
Spray on desired parts and allow to soak.
For better results, do not wipe off.
Precautions:
The contents are highly flammable and under pressure.
Keep away from heat and flame.
Do not puncture or incinerate the can.
Keep away from children.
Pack Size:
100 ML

Vendor: NASA
Type: Carb Cleaner
Price:
750.00
NASA Carburetor & Throttle Body Cleaner's unique blend of solvents quickly dissolves gum, varnish, and carbon to restore carburetor and engine performance. It is also a great cleaner for the throttle plate area of fuel-injected vehicles, vacuum piston/cylinder, and PVC valves.
Uses & Benefits:
It is used in carburetors of gas and petrol automobiles and generators to clean and dissolve gums, varnish, and carbon to restore carburetors and engine performance.
It is also very effective to clean carbon from petrol and natural gas generators and other metal parts.
It can also be used to clean motorcycle carburetors.
It is highly effective in increasing the efficiency of fuel consumption and all types of generators, motorcycles, & cars.
Directions:
With cold engine, remove air filter.
With engine off, spray on carburetor interior and exterior surface. Let it soak and shortly afterwards spray again.
Spray NASA Carb & Throttle cleaner on automatic choke and carburetor butterfly, then open and close manually until they move freely.
Spray on vacuum piston/cylinder generously.
Spray on all throttle linkage to free action.
For fuel injected vehicles: With the engine running, spray generously into air intake port. Rev engine occasionally until idle returns to normal.
For PVC valves: With engine cold, disconnect hose from the valve. Insert extension tube into valve opening and spray while moving valve back and forth. Start the engine and spray three to four short bursts.
Precautions:
The contents are highly flammable and under pressure.
Keep away from heat and flame.
Do not puncture or incinerate the can.
Keep away from children.
Pack Size:
300 ML, 450 ML, 650 ML

Vendor: NASA
Type: Carb Cleaner
Price:
699.00
NASA Carburetor & Throttle Body Cleaner's unique blend of solvents quickly dissolves gum, varnish, and carbon to restore carburetor and engine performance. It is also a great cleaner for the throttle plate area of fuel-injected vehicles, vacuum piston/cylinder, and PVC valves.
Uses & Benefits:
It is used in carburetors of gas and petrol automobiles and generators to clean and dissolve gums, varnish, and carbon to restore carburetors and engine performance.
It is also very effective to clean carbon from petrol and natural gas generators and other metal parts.
It can also be used to clean motorcycle carburetors.
It is highly effective in increasing the efficiency of fuel consumption and all types of generators, motorcycles, & cars.
Directions:
With cold engine, remove air filter.
With engine off, spray on carburetor interior and exterior surface. Let it soak and shortly afterwards spray again.
Spray NASA Carb & Throttle cleaner on automatic choke and carburetor butterfly, then open and close manually until they move freely.
Spray on vacuum piston/cylinder generously.
Spray on all throttle linkage to free action.
For fuel injected vehicles: With the engine running, spray generously into air intake port. Rev engine occasionally until idle returns to normal.
For PVC valves: With engine cold, disconnect hose from the valve. Insert extension tube into valve opening and spray while moving valve back and forth. Start the engine and spray three to four short bursts.
Precautions:
The contents are highly flammable and under pressure.
Keep away from heat and flame.
Do not puncture or incinerate the can.
Keep away from children.
Pack Size:
300 ML, 450 ML, 650 ML

Vendor: NASA
Type: Carb Cleaner
Price:
599.00
NASA Carburetor & Throttle Body Cleaner's unique blend of solvents quickly dissolves gum, varnish, and carbon to restore carburetor and engine performance. It is also a great cleaner for the throttle plate area of fuel-injected vehicles, vacuum piston/cylinder, and PVC valves.
Uses & Benefits:
It is used in carburetors of gas and petrol automobiles and generators to clean and dissolve gums, varnish, and carbon to restore carburetors and engine performance.
It is also very effective to clean carbon from petrol and natural gas generators and other metal parts.
It can also be used to clean motorcycle carburetors.
It is highly effective in increasing the efficiency of fuel consumption and all types of generators, motorcycles, & cars.
Directions:
With cold engine, remove air filter.
With engine off, spray on carburetor interior and exterior surface. Let it soak and shortly afterwards spray again.
Spray NASA Carb & Throttle cleaner on automatic choke and carburetor butterfly, then open and close manually until they move freely.
Spray on vacuum piston/cylinder generously.
Spray on all throttle linkage to free action.
For fuel injected vehicles: With the engine running, spray generously into air intake port. Rev engine occasionally until idle returns to normal.
For PVC valves: With engine cold, disconnect hose from the valve. Insert extension tube into valve opening and spray while moving valve back and forth. Start the engine and spray three to four short bursts.
Precautions:
The contents are highly flammable and under pressure.
Keep away from heat and flame.
Do not puncture or incinerate the can.
Keep away from children.
Pack Size:
300 ML, 450 ML, 650 ML

Vendor: 3M
Type: Lubricant
Price:
3199.00
08898 3M Multi Purpose Spray Lubricant, 10.5 oz.
Specialized formula for general or all-around use. Provides characteristics of a lubricating oil, a penetrating oil, a demoisturizing coating, a thin bodied, transparent rust preventative coating in aerosol form.
• Penetrates fast
• Stops squeaks
• Helps lubricate and free rusted parts
DIRECTIONS FOR USE:
1. Shake can thoroughly.
2. Hold can 8-10 inches away from surface and apply evenly.
3. May be used with or without the extension tube.

Vendor: KOCH CHEMIE
Type: Engine Dressing
Price:
24999.00
Semi-gloss-shiny, hydrocarbon based conserver for engines, housing parts and power units of cars, commercial vehicles, etc. Treated parts regain their new appearance and are protected from corrosion and environmental factors by the permanently elastic protective film. The complete drying (no lubricating film) prevents dirt sticking. Suitable for use on dry surfaces. Temperature-resistant to 200°C. Silicone oil free.
Engines, housing parts and power units of cars, commercial vehicles, etc.
Use the spray bottle to apply a thin even film over the pre washed, dry surface and leave to dry.
Container

Vendor: Gumout
Type: Carb Cleaner
Price:
2999.00
The carburetors and choke valves in small engines are especially prone to gum, varnish and dirt buildup because of less frequent use. Gumout® Small Engine Carb + Choke Cleaner quickly removes these deposits from the inside and outside of the carburetor to improve engine performance and fuel economy.
Keep away from battery terminals and electrical connections. To use plastic tube, insert it firmly into valve button.
With engine off and cool:
Carburetor: Remove the air cleaner and clean the outside of the carburetor and all other linkage. Avoid spraying electrical connections.
With engine running:
Carburetor: Spray down and around the carburetor throat to remove deposits from the throttle plate area.
Use each time the air filter is changed. If sprayed on painted surface, wipe off at once.

Vendor: LION
Type: Belt Dressing
Price:
1199.00
LION Contact Cleaner cleans oil, dirt, grease, moisture and condensation from circuit boards, switches, sockets, electrical contacts, etc. LION Contact Cleaner is residue-free and safe to use on a wide variety of plastics. Prevents degradation of electrical components to be cleaned.

Vendor: LION
Type: Belt Dressing
Price:
1650.00
LION Belt Dressing & Conditioner eliminates squeaks, and prevents slippage and prolongs belt life. LION Belt Dressing & Conditioner can be used on all round, flat or V belts (rubber, leather, fabric or canvas). LION Belt Dressing & Conditioner can be used in auto, industrial machinery or farm equipment.

Vendor: STP
Type: Spray
Price:
2450.00
Uneven braking, noise and chattering can be caused by brake shoe and pad lining dust, brake fluid seepage, and slippery road film that contaminates brake drums and discs. STP® Professional Series Heavy Duty Brake Parts Cleaner will help improve brake action for smoother and more dependable performance.
STP® Professional Series Heavy Duty Brake Parts Cleaner assists in the prevention of uneven braking, noise and chattering by quickly dissolving and washing away lining dust, brake fluid, oily road film and grit to leave brake surfaces clean, without disassembly.
How it helps:
OTHER USES: May also be used to degrease metal assemblies quickly and safely.
Usage Frequency: Use as required.

Vendor: AMS Oil
Type: Engine lube
Price:
2999.00
High-Quality Assembly Lube for Racing, Performance and Other Four-Stroke Engines
Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.
Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.
Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. AMSOIL Assembly Lube contains rust and corrosion inhibitors that protect engine components during inactivity.
Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.
Easy and Precise Application
AMSOIL Assembly Lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.
APPLICATIONS
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.

Vendor: AMS Oil
Type: Brake Lube
Price:
1999.00
AMSOIL Brake & Parts Cleaner (BPC) quickly removes oil, grease, brake fluid and other contaminants from brake parts and other automotive components. It cleans brake parts with no major disassembly and leaves no residue, helping eliminate brake squeal and chatter.
Performance Features
APPLICATIONS
– Brake Parts – Brake Pads – Calipers – Drums and More
DIRECTIONS
Note: Use extension straw for precision application.
Do not apply while equipment is running. Do not apply to hot surfaces. Test on small area before using on rubber, painted or plastic surfaces. Wipe off overspray.

Vendor: AMS Oil
Type: Catalytic Cleaner
Price:
3499.00
• Cleans deposits from ethanol and degraded fuel
• Removes gum and varnish
• Maximizes horsepower
• Restores startability
• Helps improve fuel economy
Powerful foaming agents remove stubborn deposits, varnish and gum left by ethanol or degraded fuel in carbureted and fuel-injected engines. Restores startability and smooth operation while maximizing horsepower. Especially effective in powersports and small-engine applications that run, then sit for extended periods.
Vendor: Liqui Moly
Type: Catalytic Cleaner
Price:
4299.00
Suitable for all gasoline engines with a catalytic converter. Particularly as a preventative measure. 300 ml is sufficient for up to 70 liters of fuel. Effect remains for up to 2,000 km.
Protects the catalytic converter from clogging with soot. Cleans the injection system and the combustion chamber. The combustion improver works directly, which leads to an immediate, measurable reduction of the pollutants. Clean engines use less fuel and emit less CO2. Prevents corrosion in the fuel system. Tested for use with turbochargers and catalytic converters.
| Content | 300 ml |
|---|---|
| Application |
Add to the fuel as a preventative measure. 300 ml is sufficient for up to 70 liters of fuel. Can be added at any time because mixing takes place automatically. Effect remains for up to 2,000 km. |
| Package Unit | 20 |
| Pallet Unit | 1540 |

Vendor: Liqui Moly
Type: Diesel Intake Cleaner
Price:
3850.00
Special active solvent with a high-tech additive combination for removing typical dirt and deposits in the intake and throttle valve area. Loosens and removes greasy deposits and dirt such as oil, soot, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of diesel-powered engines.
Available pack sizes
400 ml Can aerosol (Part No. 5168)
Description
Special active solvent with a high-tech additive combination for removing typical contamination and deposits found in the diesel intake and throttle valve areas. Dissolves and removes all greasy deposits and contaminants such as oil, resins, adhesive residues, etc. Ensures operability of all moving parts and reduces fuel consumption. Increases the reliability of diesel-powered engines. Recommended for preventative use during an inspection. Suitable for vehicles with EGR (exhaust gas re-circulation) valve and DPF (diesel particulate filter).
Intended use
For cleaning the entire intake system.
Suitable only for use in diesel engines!
Properties
Areas of application
For cleaning the entire intake system. Suitable only fur use in diesel engines!
Application
Create access to the intake pipe and remove contamination by means of a spray stream. Thanks to the long spray probe, the entire intake duct can be cleaned. Start engine and clean the admission tract in short spray intervals (2-3 second) with the engine running (2000 rpm). With an extreme increase in rpm (>1000 rpm) during treatment, stop the dosage of the spray rate. Important: Application only with engine running.

Vendor: Liqui Moly
Type: Carb Cleaner
Price:
3499.00
Part No: 5111
Special active solvent for cleaning typical dirt and deposits in the intake and throttle valve area. Loosens and removes all dirty deposits and dirt such as oil, resin, glue, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of gasoline-powered engines.
For the intake and throttle valve area including nozzles and holes. Only suitable for use in gasoline engines.

Vendor: Liqui Moly
Type: Air Flow Sensor Cleaner
Price:
5299.00
Part No: 4066
Description
Special active solvent for fast and gentle cleaning of sensitive components of the air flow sensor in gasoline and diesel engines. The Cleaner also distinguishes itself by means of a very fast evaporation that is free of residues. A dirty hot wire or hot plate in the air flow sensor leads to incorrect readings for calculating the fuel/air mixture. The starting and idling properties of the vehicle are thus impaired, the engine performance is reduced and the fuel consumption increases. Also, dirty sensors on vehicles with automatic transmissions can cause shifting problems. Thanks to the use of the Air Flow Sensor Cleaner, an expensive replacement of the sensor can most likely be avoided.
Properties
- simple to use
- fast evaporation free of residues
- excellent cleaning effect
- economical
Areas of application
Removes contaminants at the hot wire or the hot plate of air flow sensors. Suitable for use in gasoline and diesel engines. Application Disconnect electrical connection of the air flow sensor and remove the sensor. Spray generously onto dirty components such as the hot wire or hot plate and allow the dirt to drip off. Do not touch the sensitive components of the sensor. Allow the solvent to dry completely before installation.
Application
is recommended every time the air filter is replaced or when problems arise. Note: Before using on plastics that are sensitive to solvents, especially on mechanically-loaded parts, test for compatibility.

Vendor: Sonax
Type: Engine Starter
Price:
2299.00
PN: 3121000
Size: 250ml
The reliable cold start product for petrol and diesel engines. Ensures that engines start immediately. Protects engine and battery and prevents icing up of the carburettor. For cars, heavy goods vehicles, boats, lawn mowers, agricultural machinery etc.

Vendor: STP
Type: AC Leak treatment
Price:
10500.00
A/C Pro® Super Seal Stop Leak Kit contains special sealing additives that help repair pinhole leaks in the metal components of A/C systems and common leaks in rubber components. The removable hose and adapter are both reusable. Immediately after using A/C Pro® Super Seal on the A/C system, R-134a must be added.